产品特点Product Features
1. 天洋白色EVA封装胶膜JCC-105W是应用于光伏组件封装的快固化热熔封装胶膜。JCC-105W在组件中应用于电池片背面，可以有效提高组件的发电效率
2. 天洋白色EVA封装胶膜具有优异的反射率、电绝缘性能、紫外稳定性、湿热稳定性和抗PID性能。
3. 天洋白色EVA封装胶膜与玻璃和背板等材料有良好的粘接性能。
1. Tianyang white EVA encapsulant film JCC-105W s fast cure thermosetting encapsulant that is designed to work with PV modules.JCC-105Wis designed for the application of backside encapsulant of solar cells to increase power generation efficiency of solar modules.
2. Tianyang white EVA encapsulant film provides great benefits such as good light reflection, high electric insulation, excellent Uv, damp heat aging stability and PID resistance.
3. Tianyang white EVA encapsulant film provides and keeps excellent adhesion strength with glass and backsheet.
技术参数Technial Dat
项目 Itemsa | 单位Unit | 测试方法/Test Method | JCC-105W/白色EVA/White EVA | |
拉伸强度/Tensile Strength | MPa | ISO527-3 | ≥15 | |
断裂伸长率/Elongation at Break | % | IS0527-3 | ≥500 | |
与玻璃的剥离强度(145℃、15min固化后) Bonding Strength to Glass(145℃,15 min curing) | N/cm | GB/T29848-2018 | ≥60 | |
与背板的剥离强度(145℃、15min固化后) Peeling Strength to backsheet(145℃,15 min curing) | N/cm | GB/T29848-2018 | ≥60 | |
反射率(固化后) Reflectivity (after curing) | 400-700nm | % | GB/T29848-2018 | ≥90 |
体积电阻率/Volume Resistance | % | GB/T1410-2006 | ≥1×1014 | |
收缩率(120℃,10min) Shrinkage (120°C, 10min) | % | GB/T29848-2018 | MD≤3 | |
| TD≤1.5 | ||||
交联度(145℃,15 min) Crosslinking Degree(145℃,15min) | % | GB/T29848-2018 | ≥75 | |
Y紫外变色(120kWh/m2) Y Discoloration after UV(120kWh/m2) | % | GB/T29848-2018 | ≤3 | |
Y湿热老化变色(85℃,85%RH,1000hrs) Y Discoloration after Damp Heat (85°℃,85% RH,1000hrs) | % | GB/T29848-2018 | ≤3 | |
层压工艺条件Lamination Process
建议层压温度：138-148℃,抽真空时间：4-6分钟，层压时间：8-10分钟。 Suggested lamination temperature:138-148℃,Evacuation time:4-6 minutes, Curingtime:8-10 minutes.
产品规格Product Specification
产品外型：双面花纹型，也可根据用户所需定制其他花纹产品。
产品厚度：0.45mm～0.55mma
产品克重：340-600g/m,或者根据客户要求定制。
产品幅宽：最大幅宽2000mm。
每卷长度：可根据客户要求制定。
Product appearance: Double-sided pattern, or to be customized according to customer requirements.
Product thickness: 0.45mm to 0.55mm.
Product weight: 340~600g/m²,or to be customized according to customer requirements.
Product width: maximum to 2000mm.
Length of each roll: Can be customized according to customer requirements.
储存条件 Storage
产品在合理的储存条件下保质期为6个月(从生产之日起)。产品必须储存在室内，温度范围在0°C-30°C，湿度低于60%，避免阳光直射。不得将产品放置于热源附近或者暴露于灰尘环境。拆除包装前需检查包装是否完好。包装拆除后尽快用完。
Shelf life is 6 months under proper storage conditions (from manufacturing date). The product shall be stored indoor with the temperature controlled between 0 °C-30°C and relative humidity below 60%, avoiding direct sunlight. The product shall not be placed near any heating equipment or exposed in a dusty place. Check the package box of stored product before unfolding. The product shall be used up as soon as possible after the package is unfolded
执行国家标准:GB/T29848-2013
National standard: GB/T 29848-2013
其他说明 Other Instructions
技术信息：文中描述的技术信息，推荐内容和其他陈述基于天洋的测试结果与经验，天洋确信这些内容和陈述是可靠的，但是不对上述数据的精确性和陈述提供保证。
产品使用：在产品使用过程中，使用者会有不同的应用方式与独有的认知，会有许多不同的因素会影响天洋胶膜产品的性能。使用者在使用前需根据自身的情况与使用条件对产品做出测试与评估，并对自身使用的产品独立承担责任。
保证书，有限赔偿与否决:天洋保证在装运产品时，每个天洋品都符合适用的天洋产品规范，除非适用的天洋产品包装或产品说明书中明确规定了附加保证。天洋不作任何其他明示或默示的保证或条件，包括但不限于商业性或特定用途适用性的任何默示保证或条件，或因交易过程、习惯或贸易惯例而产生的任何默示保证或条件。如果天洋产品不符合本保证，则天洋可自行选择更换天洋产品或退还购买价格。
责任限制：除非法律禁止，天洋不对天洋产品造成的任何损失或损害承担责任，无论是直接的、间接的、特殊的、附带的还是后果性的，无论所主张的法律理论如何，包括保证、合同、疏忽或严格责任。
Technical Information: The technical information, recommended content, and other statements described in the article are based on Tianyang's testing results and experience. Tianyang is confident that these contents and statements are reliable, but does not guarantee the accuracy and statements of the above data.
Product use: During the use of the product, users will have different application methods and unique cognition, and there will be many different factors that can affect the performance of Tianyang adhesive film products. Users need to test and evaluate the product based on their own situation and usage conditions before use, and independently assume responsibility for the product they use.
Warranty, Limited Compensation and Rejection: Tianyang guarantees that each Tianyang product complies with applicable Tianyang product specifications when shipped, unless additional warranties are explicitly stated in the applicable Tianyang product packaging or product manual. Tianyang makes no other express or implied warranties or conditions, including but not limited to any implied warranties or conditions of commercial or specific applicability, or any implied warranties or conditions arising from the course of transactions, customs or trade practices. If Tianyang products do not comply with this warranty, Tianyang may choose to replace Tianyang products or refund the purchase price at its own discretion.
Limitation of Liability: Unless prohibited by law, Tianyang shall not be liable for any loss or damage caused to Tianyang products, whether direct, indirect, special, incidental or consequential, regardless of the legal theory claimed, including warranties, contracts, negligence or strict liability.
